Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Safety data sheet reference · CAS 127-18-4

Tetrachloroethylene SDS

also: tetrachloroethylene MSDS · safety data sheet · Cl2C=CCl2 · CAS 127-18-4 · EC 204-825-9 · perchloroethylene · perc · PCE

Warning Carc. 2 Category 2 UN 1897 · ADR 6.1 · PG III
Health Hazard GHS08 Environmental Hazard GHS09

Official PDF from supplier

This page is a reference, not the legal document.

CAS number

127-18-4

EC number

204-825-9

CLP Annex VI index

602-028-00-4

Molecular formula

C2Cl4

Structural formula

Cl2C=CCl2

Molar mass

165.8 g/mol

§ 02 · Hazards identification

Tetrachloroethylene harmonised EU classification

CLP Annex VI · Index 602-028-00-4. A supplier SDS may add self-classified hazards — this is the legal minimum.

H351 Suspected of causing cancer. Carcinogenicity — Category 2 (Carc. 2)
H411 Toxic to aquatic life with long lasting effects. Aquatic chronic — Category 2

Precautionary statements

P201 Obtain special instructions before use.
P273 Avoid release to the environment.
P280 Wear protective gloves, protective clothing, eye protection and face protection.
P308 IF exposed or concerned:
P313 Get medical advice or attention.
P391 Collect spillage.
P501 Dispose of contents and container in accordance with local regulations.

Codes ending in a colon introduce the action that follows — on a label they are printed as combined statements, such as P305+P351+P338.

§ 03 · Composition and identifiers

Tetrachloroethylene molecular structure

Tetrachloroethylene is a molecular compound. The skeletal formula below is drawn from its PubChem SMILES string, and every value in this section is computed from that structure.

Skeletal formula of tetrachloroethylene (Cl2C=CCl2)

2D skeletal formula · Cl2C=CCl2

SMILES C(=C(Cl)Cl)(Cl)Cl
InChI InChI=1S/C2Cl4/c3-1(4)2(5)6
InChIKey CYTYCFOTNPOANT-UHFFFAOYSA-N
PubChem CID 31373 →

Functional group

alkene

Hybridisation

C sp² ×2 · Cl sp³ ×4

Electron count

36 valence e⁻ · 12 lone pairs

Identifiers from PubChem (NIH, public domain). Structure diagram drawn with RDKit from the SMILES string. Geometry and hybridisation are computed from the connection table, not measured.

§ 04 · First-aid measures

Tetrachloroethylene first aid measures

Call your national emergency number first. These are published first-aid measures, not medical advice, and they do not replace emergency services, a poison control centre or the supplier's safety data sheet.

§4–§6 below reproduce the CAMEO Chemicals entry PERCHLOROETHYLENE. CAMEO publishes response data per product entry, so the entry can describe a solution, a refrigerated liquid or a molten form rather than the pure substance in §9 — check it matches what you are handling.

EYES

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

SKIN

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.

INHALATION

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.

INGESTION

DO NOT INDUCE VOMITING. Corrosive chemicals will destroy the membranes of the mouth, throat, and esophagus and, in addition, have a high risk of being aspirated into the victim's lungs during vomiting which increases the medical problems. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. Transport the victim IMMEDIATELY to a hospital.

OTHER

Since this chemical is a known or suspected carcinogen you should contact a physician for advice regarding the possible long term health effects and potential recommendation for medical monitoring. Recommendations from the physician will depend upon the specific compound, its chemical, physical and toxicity properties, the exposure level, length of exposure, and the route of exposure.

Source: NTP, 1992 — via CAMEO Chemicals (NOAA), public domain.

§ 05 · Fire-fighting measures

Tetrachloroethylene fire fighting measures

ERG 2024 · GUIDE 160 Halogenated Solvents

ERG guidance is written per response guide, not per substance — Guide 160 covers every material assigned to it, so a few sentences reference other UN numbers in the same group.

Fire and explosion hazard

Special Hazards of Combustion Products: Toxic, irritating gases may be generated in fires.

Extinguishing media and tactics

SMALL FIREDry chemical, CO2 or water spray.

LARGE FIREDry chemical, CO2, alcohol-resistant foam or water spray. If it can be done safely, move undamaged containers away from the area around the fire. Dike runoff from fire control for later disposal.

FIRE INVOLVING TANKS, RAIL TANK CARS OR HIGHWAY TANKSFight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks in direct contact with flames.

Source: ERG, 2024 — via CAMEO Chemicals (NOAA), public domain. Entry: PERCHLOROETHYLENE.

§ 06 · Accidental release measures

Tetrachloroethylene spill and leak response

Containment and clean-up

ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area. Stop leak if you can do it without risk.

SMALL LIQUID SPILLPick up with sand, earth or other non-combustible absorbent material.

LARGE SPILLDike far ahead of liquid spill for later disposal. Prevent entry into waterways, sewers, basements or confined areas.

Initial isolation and evacuation

IMMEDIATE PRECAUTIONARY MEASUREIsolate spill or leak area for at least 50 meters (150 feet) in all directions.

LARGE SPILLConsider initial downwind evacuation for at least 100 meters (330 feet).

FIREIf tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions.

Source: ERG, 2024 — via CAMEO Chemicals (NOAA), public domain. Entry: PERCHLOROETHYLENE.

§ 07 · Handling and storage

Tetrachloroethylene computed storage compatibility

No storage segregation conflicts documented

Derived from CLP Annex VI classification and CAMEO reactive-group data — not copied from a PDF.

Full interactive verdict — reactions, gas release on contact, ADR forms →

§ 08 · Exposure controls

Tetrachloroethylene exposure limits (IDLH)

IDLH

Immediately Dangerous to Life or Health

150 ppm

Carcinogen

NIOSH lists tetrachloroethylene as a potential occupational carcinogen — exposure should be kept as low as achievable regardless of the IDLH figure.

NIOSH Pocket Guide — Tetrachloroethylene →

IDLH from the NIOSH Pocket Guide to Chemical Hazards (CDC, U.S. public domain), via CAMEO Chemicals. Occupational exposure limits — OSHA PEL, NIOSH REL and EU IOELV — are not published on this page yet.

§ 09 · Physical and chemical properties

Tetrachloroethylene physical properties

Melting point -18.9 °C
Boiling point 121.1 °C
Relative density (water = 1) 1.63

Source: CAMEO Chemicals (NOAA, public domain); per-value source references stored in the database.

§ 10 · Stability and reactivity

Reactive group (CAMEO/NOAA): Halogenated Organic Compounds, Hydrocarbons, Aliphatic Unsaturated. Our database documents 30 incompatible and 21 caution reaction-partner groups for tetrachloroethylene — including which combinations release gas on contact. See the per-partner breakdown with gas release →

30

Incompatible

21

Caution

§ 13 · Disposal considerations

Dispose of waste and residues in accordance with local and national regulations — in the EU under the Waste Framework Directive 2008/98/EC. Never discharge to drains or municipal waste; hand contaminated packaging and unused product to an authorised waste-disposal company. The supplier's SDS section 13 lists the applicable waste codes for the specific product.

§ 14 · Transport information

Tetrachloroethylene road transport — ADR 2025

UN number

UN 1897

Proper shipping name

TETRACHLOROETHYLENE

Class · PG

6.1 · III

Classification code

T1

Transport category

2

ADR labels

6.1

Hazard ID (Kemler) / UN plate

60
1897

Top: hazard identification number (Kemler). Bottom: UN number — as carried on the orange plate of the transport unit.

Source: UN ADR 2025 (ECE/TRANS/352), Table A. Road (ADR) only — for sea (IMDG) and air (IATA), consult the supplier's SDS §14.

MSDS vs SDS

Tetrachloroethylene MSDS vs SDS: is there a difference?

MSDS (Material Safety Data Sheet) is the older name for the same document. In the US, OSHA's Hazard Communication Standard (2012) adopted the GHS-standardised 16-section Safety Data Sheet; in the EU the format is set by REACH Annex II. So a "tetrachloroethylene MSDS" and a "tetrachloroethylene SDS" refer to the same document — today it is issued as an SDS. Full breakdown of the differences →

Substance profile

What tetrachloroethylene is

Physical and chemical properties with the conditions each value was measured under, synonyms, formula and the harmonised CLP classification →

Compliance hub

From classification to SDS

The classification above corresponds to Section 2 of a Safety Data Sheet. Learn how a compliant 16-section SDS is structured and authored →

GHS label maker

Build the label for tetrachloroethylene

Pictograms, signal word and H-statements combined into a compliant label layout →

§ 16 · Sources

Reference aid only. This page summarises the harmonised EU classification and computed storage guidance — it is not a Safety Data Sheet and does not replace one. Always verify hazards, handling and storage against the supplier's SDS (sections 7 and 10) and local regulations before use. Page updated 2026-08-11.

Frequently asked questions about tetrachloroethylene

Is an MSDS the same as an SDS?

In practice, yes. MSDS (Material Safety Data Sheet) is the older name for the same document. In the US, OSHA's Hazard Communication Standard (2012) adopted the GHS-standardised 16-section Safety Data Sheet; in the EU the SDS format is set by REACH Annex II. A document you find labelled "tetrachloroethylene MSDS" is today issued as an SDS.

What GHS pictograms does tetrachloroethylene require?

Under the harmonised EU classification (CLP Annex VI), tetrachloroethylene carries GHS08 and GHS09 with the signal word "Warning". Hazard statements: H351, H411. A supplier's SDS may add self-classified hazards on top of this harmonised minimum.

Where can I download an official tetrachloroethylene SDS PDF?

From your own supplier — an SDS is issued per product and supplier, so the correct PDF for an inspection is the one matching the product you actually purchased. The supplier links on this page lead to the official SDS libraries of major distributors.

Emergency mode Tetrachloroethylene

Call emergency services first

112 in the EU · 911 in the US. This screen is published response information, not medical advice, and it does not replace emergency services, a poison centre or the supplier's safety data sheet.

Text below is the CAMEO Chemicals entry PERCHLOROETHYLENE — confirm it matches the form in front of you.

01 · First aid

What to do for the person

EYES

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

SKIN

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.

INHALATION

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.

INGESTION

DO NOT INDUCE VOMITING. Corrosive chemicals will destroy the membranes of the mouth, throat, and esophagus and, in addition, have a high risk of being aspirated into the victim's lungs during vomiting which increases the medical problems. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. Transport the victim IMMEDIATELY to a hospital.

OTHER

Since this chemical is a known or suspected carcinogen you should contact a physician for advice regarding the possible long term health effects and potential recommendation for medical monitoring. Recommendations from the physician will depend upon the specific compound, its chemical, physical and toxicity properties, the exposure level, length of exposure, and the route of exposure.

02 · Fire

Extinguishing and tactics

Fire and explosion hazard

Special Hazards of Combustion Products: Toxic, irritating gases may be generated in fires.

Extinguishing media and tactics

SMALL FIREDry chemical, CO2 or water spray.

LARGE FIREDry chemical, CO2, alcohol-resistant foam or water spray. If it can be done safely, move undamaged containers away from the area around the fire. Dike runoff from fire control for later disposal.

FIRE INVOLVING TANKS, RAIL TANK CARS OR HIGHWAY TANKSFight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks in direct contact with flames.

03 · Spill

Containment, isolation, evacuation

Containment and clean-up

ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area. Stop leak if you can do it without risk.

SMALL LIQUID SPILLPick up with sand, earth or other non-combustible absorbent material.

LARGE SPILLDike far ahead of liquid spill for later disposal. Prevent entry into waterways, sewers, basements or confined areas.

Initial isolation and evacuation

IMMEDIATE PRECAUTIONARY MEASUREIsolate spill or leak area for at least 50 meters (150 feet) in all directions.

LARGE SPILLConsider initial downwind evacuation for at least 100 meters (330 feet).

FIREIf tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions.

Sources: ERG 2024 (PHMSA) · NIOSH Pocket Guide (CDC) · CHRIS (USCG) · NTP · EPA — via CAMEO Chemicals (NOAA), public domain. Text reproduced verbatim.

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.