Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Safety data sheet reference · CAS 142-82-5

Heptane SDS

also: heptane MSDS · safety data sheet · CH3(CH2)5CH3 · CAS 142-82-5 · EC 205-563-8 · n-heptane

Danger · Flam. Liq. 2 Asp. Tox. 1 · STOT SE 3 · Skin Irrit. 2 Aquatic Acute 1 · Aquatic Chronic 1 UN 1206 · ADR 3 · PG II
Flame GHS02 Exclamation Mark GHS07 Health Hazard GHS08 Environmental Hazard GHS09

Official PDF from supplier

This page is a reference, not the legal document.

CAS number

142-82-5

EC number

205-563-8

CLP Annex VI index

601-008-00-2

Molecular formula

CH3(CH2)5CH3

§ 02 · Hazards identification

Heptane harmonised EU classification

CLP Annex VI · Index 601-008-00-2. A supplier SDS may add self-classified hazards — this is the legal minimum.

H225 Highly flammable liquid and vapour. Flammable liquid — Category 2 (Flam. Liq. 2)
H304 May be fatal if swallowed and enters airways. Aspiration hazard — Category 1 (Asp. Tox. 1)
H315 Causes skin irritation. Skin irritation — Category 2 (Skin Irrit. 2)
H336 May cause drowsiness or dizziness. Narcotic effects — STOT SE 3
H400 Very toxic to aquatic life. Hazardous to aquatic environment, acute — Category 1 (Aquatic Acute 1)
H410 Very toxic to aquatic life with long lasting effects. Hazardous to aquatic environment, chronic — Category 1 (Aquatic Chronic 1)

Precautionary statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P241 Use explosion-proof electrical, ventilating and lighting equipment.
P242 Use only non-sparking tools.
P264 Wash hands thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves, protective clothing, eye protection and face protection.
P302 IF ON SKIN:
P313 Get medical advice or attention.
P332 If skin irritation occurs:
P352 Wash with plenty of water.
P391 Collect spillage.
P403 Store in a well-ventilated place.
P501 Dispose of contents and container in accordance with local regulations.

Codes ending in a colon introduce the action that follows — on a label they are printed as combined statements, such as P305+P351+P338.

§ 03 · Composition and identifiers

Heptane molecular structure

Heptane is a molecular compound. The skeletal formula below is drawn from its PubChem SMILES string, and every value in this section is computed from that structure.

Skeletal formula of heptane (CH3(CH2)5CH3)

2D skeletal formula · CH3(CH2)5CH3

SMILES CCCCCCC
InChI InChI=1S/C7H16/c1-3-5-7-6-4-2/h3-7H2,1-2H3
InChIKey IMNFDUFMRHMDMM-UHFFFAOYSA-N
PubChem CID 8900 →

Hybridisation

C sp³ ×7

Electron count

44 valence e⁻ · 0 lone pairs

Identifiers from PubChem (NIH, public domain). Structure diagram drawn with RDKit from the SMILES string. Geometry and hybridisation are computed from the connection table, not measured.

§ 04 · First-aid measures

Heptane first aid measures

Call your national emergency number first. These are published first-aid measures, not medical advice, and they do not replace emergency services, a poison control centre or the supplier's safety data sheet.

§4–§6 below reproduce the CAMEO Chemicals entry N-HEPTANE. CAMEO publishes response data per product entry, so the entry can describe a solution, a refrigerated liquid or a molten form rather than the pure substance in §9 — check it matches what you are handling.

Eye: IRRIGATE IMMEDIATELY - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.

Skin: SOAP WASH PROMPTLY - If this chemical contacts the skin, promptly wash the contaminated skin with soap and water. If this chemical penetrates the clothing, promptly remove the clothing and wash the skin with soap and water. Get medical attention promptly.

Breathing: RESPIRATORY SUPPORT - If a person breathes large amounts of this chemical, move the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the affected person warm and at rest. Get medical attention as soon as possible.

Swallow: MEDICAL ATTENTION IMMEDIATELY - If this chemical has been swallowed, get medical attention immediately.

Source: NIOSH, 2024 — via CAMEO Chemicals (NOAA), public domain.

§ 05 · Fire-fighting measures

Heptane fire fighting measures

ERG 2024 · GUIDE 128 Flammable Liquids (Water-Immiscible)

ERG guidance is written per response guide, not per substance — Guide 128 covers every material assigned to it, so a few sentences reference other UN numbers in the same group.

Fire and explosion hazard

FLAMMABLE. Flashback along vapor trail may occur. Vapor may explode if ignited in an enclosed area.

Extinguishing media and tactics

CAUTIONThe majority of these products have a very low flash point. Use of water spray when fighting fire may be inefficient. CAUTION: For mixtures containing alcohol or polar solvent, alcohol-resistant foam may be more effective.

SMALL FIREDry chemical, CO2, water spray or regular foam. If regular foam is ineffective or unavailable, use alcohol-resistant foam.

LARGE FIREWater spray, fog or regular foam. If regular foam is ineffective or unavailable, use alcohol-resistant foam. Avoid aiming straight or solid streams directly onto the product. If it can be done safely, move undamaged containers away from the area around the fire.

FIRE INVOLVING TANKS, RAIL TANK CARS OR HIGHWAY TANKSFight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. For petroleum crude oil, do not spray water directly into a breached tank car. This can lead to a dangerous boil over. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks in direct contact with flames. For massive fire, use unmanned master stream devices or monitor nozzles; if this is impossible, withdraw from area and let fire burn.

Source: ERG, 2024 — via CAMEO Chemicals (NOAA), public domain. Entry: N-HEPTANE.

§ 06 · Accidental release measures

Heptane spill and leak response

Containment and clean-up

ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area. All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean, non-sparking tools to collect absorbed material.

LARGE SPILLDike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces.

Initial isolation and evacuation

IMMEDIATE PRECAUTIONARY MEASUREIsolate spill or leak area for at least 50 meters (150 feet) in all directions.

LARGE SPILLConsider initial downwind evacuation for at least 300 meters (1000 feet).

FIREIf tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions.

Source: ERG, 2024 — via CAMEO Chemicals (NOAA), public domain. Entry: N-HEPTANE.

§ 07 · Handling and storage

Heptane computed storage compatibility

§ 08 · Exposure controls

Heptane exposure limits (IDLH)

IDLH

Immediately Dangerous to Life or Health

750 ppm

NIOSH Pocket Guide — Heptane →

IDLH from the NIOSH Pocket Guide to Chemical Hazards (CDC, U.S. public domain), via CAMEO Chemicals. Occupational exposure limits — OSHA PEL, NIOSH REL and EU IOELV — are not published on this page yet.

§ 09 · Physical and chemical properties

Heptane physical properties

Fire-relevant values first — flash point and explosion limits decide the storage and ventilation regime.

Flash point

-3.9 °C

Explosion limits

1 – 7 %

LEL / UEL in air, vol.

Autoignition

222.8 °C

Melting point -90.6 °C
Boiling point 98.4 °C
Relative density (water = 1) 0.6838

Source: CAMEO Chemicals (NOAA, public domain); per-value source references stored in the database.

§ 10 · Stability and reactivity

Reactive group (CAMEO/NOAA): Hydrocarbons, Aliphatic Saturated. Our database documents 3 incompatible and 6 caution reaction-partner groups for heptane — including which combinations release gas on contact. See the per-partner breakdown with gas release →

3

Incompatible

6

Caution

§ 13 · Disposal considerations

Dispose of waste and residues in accordance with local and national regulations — in the EU under the Waste Framework Directive 2008/98/EC. Never discharge to drains or municipal waste; hand contaminated packaging and unused product to an authorised waste-disposal company. The supplier's SDS section 13 lists the applicable waste codes for the specific product.

§ 14 · Transport information

Heptane road transport — ADR 2025

UN number

UN 1206

Proper shipping name

HEPTANES

Class · PG

3 · II

Classification code

F1

Transport category

2

ADR labels

3

Hazard ID (Kemler) / UN plate

33
1206

Top: hazard identification number (Kemler). Bottom: UN number — as carried on the orange plate of the transport unit.

Source: UN ADR 2025 (ECE/TRANS/352), Table A. Road (ADR) only — for sea (IMDG) and air (IATA), consult the supplier's SDS §14.

MSDS vs SDS

Heptane MSDS vs SDS: is there a difference?

MSDS (Material Safety Data Sheet) is the older name for the same document. In the US, OSHA's Hazard Communication Standard (2012) adopted the GHS-standardised 16-section Safety Data Sheet; in the EU the format is set by REACH Annex II. So a "heptane MSDS" and a "heptane SDS" refer to the same document — today it is issued as an SDS. Full breakdown of the differences →

Other flammable liquids in our database

Compliance hub

From classification to SDS

The classification above corresponds to Section 2 of a Safety Data Sheet. Learn how a compliant 16-section SDS is structured and authored →

GHS label maker

Build the label for heptane

Pictograms, signal word and H-statements combined into a compliant label layout →

§ 16 · Sources

Reference aid only. This page summarises the harmonised EU classification and computed storage guidance — it is not a Safety Data Sheet and does not replace one. Always verify hazards, handling and storage against the supplier's SDS (sections 7 and 10) and local regulations before use. Page updated 2026-08-11.

Frequently asked questions about heptane

Is an MSDS the same as an SDS?

In practice, yes. MSDS (Material Safety Data Sheet) is the older name for the same document. In the US, OSHA's Hazard Communication Standard (2012) adopted the GHS-standardised 16-section Safety Data Sheet; in the EU the SDS format is set by REACH Annex II. A document you find labelled "heptane MSDS" is today issued as an SDS.

What GHS pictograms does heptane require?

Under the harmonised EU classification (CLP Annex VI), heptane carries GHS02 and GHS07 and GHS08 and GHS09 with the signal word "Danger". Hazard statements: H225, H304, H336, H315, H400, H410. A supplier's SDS may add self-classified hazards on top of this harmonised minimum.

What should heptane never be stored with?

Based on its storage class (Flammable liquids), heptane must not share storage with: Organic peroxides & self-reactives; Oxidizing acids; Oxidizers. Verify against the supplier's SDS sections 7 and 10 before finalising storage.

Where can I download an official heptane SDS PDF?

From your own supplier — an SDS is issued per product and supplier, so the correct PDF for an inspection is the one matching the product you actually purchased. The supplier links on this page lead to the official SDS libraries of major distributors.

Emergency mode Heptane

Call emergency services first

112 in the EU · 911 in the US. This screen is published response information, not medical advice, and it does not replace emergency services, a poison centre or the supplier's safety data sheet.

Text below is the CAMEO Chemicals entry N-HEPTANE — confirm it matches the form in front of you.

01 · First aid

What to do for the person

Eye: IRRIGATE IMMEDIATELY - If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.

Skin: SOAP WASH PROMPTLY - If this chemical contacts the skin, promptly wash the contaminated skin with soap and water. If this chemical penetrates the clothing, promptly remove the clothing and wash the skin with soap and water. Get medical attention promptly.

Breathing: RESPIRATORY SUPPORT - If a person breathes large amounts of this chemical, move the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the affected person warm and at rest. Get medical attention as soon as possible.

Swallow: MEDICAL ATTENTION IMMEDIATELY - If this chemical has been swallowed, get medical attention immediately.

02 · Fire

Extinguishing and tactics

Fire and explosion hazard

FLAMMABLE. Flashback along vapor trail may occur. Vapor may explode if ignited in an enclosed area.

Extinguishing media and tactics

CAUTIONThe majority of these products have a very low flash point. Use of water spray when fighting fire may be inefficient. CAUTION: For mixtures containing alcohol or polar solvent, alcohol-resistant foam may be more effective.

SMALL FIREDry chemical, CO2, water spray or regular foam. If regular foam is ineffective or unavailable, use alcohol-resistant foam.

LARGE FIREWater spray, fog or regular foam. If regular foam is ineffective or unavailable, use alcohol-resistant foam. Avoid aiming straight or solid streams directly onto the product. If it can be done safely, move undamaged containers away from the area around the fire.

FIRE INVOLVING TANKS, RAIL TANK CARS OR HIGHWAY TANKSFight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. For petroleum crude oil, do not spray water directly into a breached tank car. This can lead to a dangerous boil over. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks in direct contact with flames. For massive fire, use unmanned master stream devices or monitor nozzles; if this is impossible, withdraw from area and let fire burn.

03 · Spill

Containment, isolation, evacuation

Containment and clean-up

ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area. All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean, non-sparking tools to collect absorbed material.

LARGE SPILLDike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces.

Initial isolation and evacuation

IMMEDIATE PRECAUTIONARY MEASUREIsolate spill or leak area for at least 50 meters (150 feet) in all directions.

LARGE SPILLConsider initial downwind evacuation for at least 300 meters (1000 feet).

FIREIf tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions.

Sources: ERG 2024 (PHMSA) · NIOSH Pocket Guide (CDC) · CHRIS (USCG) · NTP · EPA — via CAMEO Chemicals (NOAA), public domain. Text reproduced verbatim.

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.