Substance profile
Diethylaminoethyl Methacrylate
Diethylaminoethyl Methacrylate is a clear, colorless liquid.
01 · Identification
What Diethylaminoethyl Methacrylate is
Diethylaminoethyl Methacrylate is a clear, colorless liquid. Its molecular formula is C10H19NO2 and its molecular weight is 185.26 g/mol. It melts at -65.5 °C.
Under the GHS it carries the signal word Warning.
02 · Identifiers
Diethylaminoethyl Methacrylate identifiers and molecular data
Diethylaminoethyl Methacrylate CAS number and EC number
Diethylaminoethyl Methacrylate molecular formula and molecular weight
Other names for Diethylaminoethyl Methacrylate
- 2-diethylaminoethyl methacrylate
03 · GHS classification
Diethylaminoethyl Methacrylate hazard classification
Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.
Diethylaminoethyl Methacrylate pictograms and signal word
Diethylaminoethyl Methacrylate hazard class and category
| Hazard class | Category | From code | Pictogram |
|---|---|---|---|
| Acute toxicity - inhalation GHS chapter 3.1 | Category 4 | H332 | GHS07 |
| Skin corrosion/irritation GHS chapter 3.2 | Category 2 | H315 | GHS07 |
| Serious eye damage/eye irritation GHS chapter 3.3 | Category 2A | H319 | GHS07 |
| Skin sensitisation GHS chapter 3.4 | Category 1 or 1A or 1B | H317 | GHS07 |
Where two values are shown with “or”, the hazard statement is shared by more than one category or by more than one class, and the code alone does not say which. H272, for example, belongs to oxidising liquids and to oxidising solids — the physical state decides. The binding answer for a specific entry is in the CLP Annex VI table itself.
Diethylaminoethyl Methacrylate hazard statements (H-codes)
| Code | Hazard statement |
|---|---|
| H332 | Harmful if inhaled. |
| H315 | Causes skin irritation. |
| H319 | Causes serious eye irritation. |
| H317 | May cause an allergic skin reaction. |
This page lists only the codes assigned to Diethylaminoethyl…. The full reference lives on the hazard statements hub, the precautionary statements hub and the GHS pictograms hub.
Safety Data Sheet
Getting an SDS for Diethylaminoethyl…
A Safety Data Sheet is written for a product, not for a substance: the supplier of the grade you actually buy issues it, so two suppliers of Diethylaminoethyl… issue two different sheets. That is why there is no single authoritative SDS for a substance to download — what there is, is the job of collecting the sheets for the products you hold and keeping them current as suppliers revise them.
04 · Precautionary statements
Diethylaminoethyl Methacrylate precautionary statements
CLP Annex VI assigns 16 precautionary statements to Diethylaminoethyl…. They are grouped the way a label groups them: what to do before handling, what to do when something has already happened, how to store it and how to dispose of it.
Prevention
What to do before and during handling so the hazard never happens.
Response
What to do once exposure, spillage or fire has already happened.
Reading the notation. … is a blank the supplier fills in — not a truncated sentence.· [square brackets] mark a part printed only when it applies.
05 · Names in the regulation
Diethylaminoethyl Methacrylate name in 23 EU languages
CLP Annex VI Part 3 is published in every language edition of the regulation, and the identification column is written out in each of them. Nothing below is translated by us: each line is the name as that edition prints it. Under Art. 18(2) the substance name from Annex VI is a lawful product identifier, so this is the wording to put on a label going to that market — and where the cell lists several designations, any one of them qualifies.
| Language | Name in CLP Annex VI Part 3 |
|---|---|
| Bulgarian български | 2-диетиламиноетилов метакрилат |
| Spanish español | Metacrilato de 2-dietilaminoetilo |
| Czech čeština | 2-(diethylamino)ethyl-methakrylát |
| Danish dansk | 2-diethylaminoethylmethacrylat |
| German Deutsch | 2-Diethylaminoethylmethacrylat |
| Estonian eesti | 2-dietüülaminoetüülmetakrülaat |
| Greek ελληνικά | μεθακρυλικός 2-διαιθυλαμινοαιθυλεστέρας μεθακρυλικό 2-διαιθυλαμινοαιθύλιο |
| English English | 2-diethylaminoethyl methacrylate |
| French français | méthacrylate de 2-diéthylaminoéthyle |
| Croatian hrvatski | 2-dietilaminoetil-metakrilat |
| Italian italiano | metacrilato di 2-dietilamino etile |
| Latvian latviešu | 2-dietilaminoetilmetakrilāts |
| Lithuanian lietuvių | 2-(dietilamino)etilmetakrilatas |
| Hungarian magyar | 2-(dietilamino)etil-metakrilát |
| Maltese Malti | metakrilat ta’ 2-dietilamminoetil |
| Dutch Nederlands | 2-diëthylaminoëthylmethacrylaat |
| Polish polski | metakrylan 2-(dietyloamino)etylu ester 2-(dietyloamino)etylowy kwasu metakrylowego |
| Portuguese português | metacrilato de 2-dietilaminoetilo |
| Romanian română | metacrilat de 2-dietilamino-etil |
| Slovak slovenčina | [2-(dietylamino)etyl]-metakrylát |
| Slovenian slovenščina | 2-dietilaminoetil metakrilat |
| Finnish suomi | 2-dietyyliaminoetyylimetakrylaatti |
| Swedish svenska | 2-dietylaminoetylmetakrylat |
All 23 language editions of Annex VI carry this entry. Irish is the twenty-fourth official EU language and has no line here for a different reason: no consolidated CLP text has ever been published in Irish, so there is no Irish edition of Annex VI to quote a name from. Source: consolidated CLP, CELEX 02008R1272, language editions. © European Union, https://eur-lex.europa.eu — only the electronic Official Journal of the European Union is authentic.
06 · Label elements
Diethylaminoethyl Methacrylate GHS label elements
Everything CLP Annex VI fixes for Diethylaminoethyl…, laid out the way it appears on a label. The greyed lines are the parts only the supplier can fill in.
Warning
Diethylaminoethyl Methacrylate
- Harmful if inhaled.
- Causes skin irritation.
- Causes serious eye irritation.
- May cause an allergic skin reaction.
- Do not breathe dust/fume/gas/mist/vapours/spray.
- Avoid breathing dust/fume/gas/mist/vapours/spray.
- Wash … thoroughly after handling.
- Use only outdoors or in a well-ventilated area.
- Contaminated work clothing should not be allowed out of the workplace.
- Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/…
- IF ON SKIN:
- IF INHALED:
- IF IN EYES:
- Call a POISON CENTER/doctor/… if you feel unwell.
- Get medical advice/attention.
- If skin irritation occurs:
- If skin irritation or rash occurs:
- If eye irritation persists:
- Remove contact lenses, if present and easy to do. Continue rinsing.
- Wash with plenty of water/…
Supplier name, address and telephone number· Product identifier·Nominal quantity
Need this as an actual label? Open Diethylaminoethyl… in the GHS label constructor →
07 · Health hazards
Diethylaminoethyl Methacrylate health hazards and exposure limits
Diethylaminoethyl Methacrylate hazard summary
In gavage studies of rabbits, electrical brain activity was suppressed followed by clonic-tonic spasms; Highly irritating to skin and eyes, based on animal studies; [HSDB] May cause severe skin irritation; [CAMEO] A skin and eye irritant; [eChemPortal: ERMA] A skin and eye irritant; May cause skin sensitization; [eChemPortal: ESIS] An irritant; Can be absorbed through skin; May cause skin sensitization; [MSDSonline] See ACRYLIC RESINS (MONOMERS).
Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
08 · Physical and chemical properties
Diethylaminoethyl Methacrylate properties
Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.
Diethylaminoethyl Methacrylate boiling point
| Property | Value | Conditions | Source |
|---|---|---|---|
| Boiling point | 80 °C (176 °F) | at 10 mmHg (reduced pressure) | HSDB |
Diethylaminoethyl Methacrylate melting point
| Property | Value | Conditions | Source |
|---|---|---|---|
| Melting point | -65.5 °C (-85.9 °F) | freezing point | HSDB |
Diethylaminoethyl Methacrylate density
| Property | Value | Conditions | Source |
|---|---|---|---|
| Density | 0.92 g/cm³ | at 20 °C | HSDB |
Diethylaminoethyl Methacrylate vapor pressure
| Property | Value | Conditions | Source |
|---|---|---|---|
| Vapor pressure | 0.11 mmHg | Haz-Map |
Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.
09 · Handling and storage
Diethylaminoethyl Methacrylate storage and handling
Diethylaminoethyl Methacrylate storage conditions
Conditions for safe storage, including any incompatibilities: Keep container tightly closed in a dry and well-ventilated place. Moisture sensitive.
Source: Hazardous Substances Data Bank (HSDB)
Diethylaminoethyl Methacrylate incompatible materials
Incompatible materials: Steel (all types and surface treatments), Strong oxidizing agents, Copper, Carbon dioxide (CO2)
Source: Hazardous Substances Data Bank (HSDB)
Diethylaminoethyl Methacrylate reactivity
An acrylic acid ester/amine. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides. Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides.
Source: CAMEO Chemicals
Planning storage for a mix of chemicals? Check Diethylaminoethyl… in the storage compatibility matrix →
10 · Questions
Diethylaminoethyl Methacrylate — frequently asked questions
What is the CAS number of Diethylaminoethyl Methacrylate?
The CAS number of Diethylaminoethyl Methacrylate is 105-16-8. Its EC number is 203-275-7.
What is the chemical formula of Diethylaminoethyl Methacrylate?
The molecular formula of Diethylaminoethyl Methacrylate is C10H19NO2 and its molecular weight is 185.26 g/mol.
What does a Diethylaminoethyl Methacrylate label have to show?
Under CLP Annex VI the label for Diethylaminoethyl Methacrylate carries the pictogram Exclamation mark and the signal word is Warning.
Is Diethylaminoethyl Methacrylate flammable?
CLP Annex VI assigns Diethylaminoethyl Methacrylate no flammability hazard class. That is not a statement that it cannot burn: the harmonised list only records the hazards that were assessed for it.
Is Diethylaminoethyl Methacrylate a carcinogen?
CLP Annex VI records no harmonised carcinogenicity classification for Diethylaminoethyl Methacrylate. Annex VI is a list of agreed classifications, not a list of substances found safe, so this is an absence of a classification rather than a clean bill of health.
What is the boiling point of Diethylaminoethyl Methacrylate?
The boiling point reported for Diethylaminoethyl Methacrylate is 80 °C (176 °F), at 10 mmHg (reduced pressure) (HSDB).
What is the melting point of Diethylaminoethyl Methacrylate?
The melting point reported for Diethylaminoethyl Methacrylate is -65.5 °C (-85.9 °F), freezing point (HSDB).
How should Diethylaminoethyl Methacrylate be stored?
Conditions for safe storage, including any incompatibilities: Keep container tightly closed in a dry and well-ventilated place. Moisture sensitive. (Hazardous Substances Data Bank (HSDB))
Nearby
Substances next to Diethylaminoethyl…
Keep going: substances starting with D, or search the whole database by name, CAS number, pictogram or signal word.