Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Substance profile

(Dimethylamino)ethyl methacrylate

(Dimethylamino)ethyl methacrylate is a liquid with an amine-like odor.

CAS 2867-47-2 C8H15NO2 157.21 g/mol Warning

01 · Identification

What (Dimethylamino)ethyl… is

(Dimethylamino)ethyl methacrylate is a liquid with an amine-like odor. Its molecular formula is C8H15NO2 and its molecular weight is 157.21 g/mol. It boils at 186 °C, melts at -30 °C.

Under the GHS it carries the signal word Warning. It is classed as flammable agents - 2nd degree.

02 · Identifiers

(Dimethylamino)ethyl… identifiers and molecular data

(Dimethylamino)ethyl… CAS number and EC number

CAS number2867-47-2
EC number220-688-8
Index number (CLP Annex VI)607-132-00-3

(Dimethylamino)ethyl… molecular formula and molecular weight

Molecular formulaC8H15NO2
Molecular weight157.21 g/mol
Chemical class Flammable agents - 2nd degree

Other names for (Dimethylamino)ethyl…

  • 2-dimethylaminoethyl methacrylate

03 · GHS classification

(Dimethylamino)ethyl… hazard classification

Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.

(Dimethylamino)ethyl… pictograms and signal word

Signal wordWarning

(Dimethylamino)ethyl… hazard class and category

GHS hazard classes (Dimethylamino)ethyl… falls into
Hazard class Category From code Pictogram
Acute toxicity - oral GHS chapter 3.1 Category 4 H302 GHS07
Acute toxicity - dermal GHS chapter 3.1 Category 4 H312 GHS07
Skin corrosion/irritation GHS chapter 3.2 Category 2 H315 GHS07
Serious eye damage/eye irritation GHS chapter 3.3 Category 2A H319 GHS07
Skin sensitisation GHS chapter 3.4 Category 1 or 1A or 1B H317 GHS07

Where two values are shown with “or”, the hazard statement is shared by more than one category or by more than one class, and the code alone does not say which. H272, for example, belongs to oxidising liquids and to oxidising solids — the physical state decides. The binding answer for a specific entry is in the CLP Annex VI table itself.

(Dimethylamino)ethyl… hazard statements (H-codes)

Hazard statements assigned to (Dimethylamino)ethyl…
CodeHazard statement
H312 Harmful in contact with skin.
H302 Harmful if swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H317 May cause an allergic skin reaction.

This page lists only the codes assigned to (Dimethylamino)ethyl…. The full reference lives on the hazard statements hub, the precautionary statements hub and the GHS pictograms hub.

Safety Data Sheet

Getting an SDS for (Dimethylamino)ethyl…

A Safety Data Sheet is written for a product, not for a substance: the supplier of the grade you actually buy issues it, so two suppliers of (Dimethylamino)ethyl… issue two different sheets. That is why there is no single authoritative SDS for a substance to download — what there is, is the job of collecting the sheets for the products you hold and keeping them current as suppliers revise them.

04 · Precautionary statements

(Dimethylamino)ethyl… precautionary statements

CLP Annex VI assigns 16 precautionary statements to (Dimethylamino)ethyl…. They are grouped the way a label groups them: what to do before handling, what to do when something has already happened, how to store it and how to dispose of it.

Reading the notation. is a blank the supplier fills in — not a truncated sentence.· [square brackets] mark a part printed only when it applies.

05 · Names in the regulation

(Dimethylamino)ethyl… name in 23 EU languages

CLP Annex VI Part 3 is published in every language edition of the regulation, and the identification column is written out in each of them. Nothing below is translated by us: each line is the name as that edition prints it. Under Art. 18(2) the substance name from Annex VI is a lawful product identifier, so this is the wording to put on a label going to that market — and where the cell lists several designations, any one of them qualifies.

Language Name in CLP Annex VI Part 3
Bulgarian български 2-диметиламиноетилов метакрилат
Spanish español Metacrilato de 2-dimetilaminoetilo
Czech čeština 2-(dimethylamino)ethyl-methakrylát
Danish dansk 2-dimethylaminoethylmethacrylat
German Deutsch 2-Dimethylaminoethylmethacrylat
Estonian eesti 2-dimetüülaminoetüülmetakrülaat
Greek ελληνικά μεθακρυλικός 2-διμεθυλαμινοαιθυλεστέρας μεθακρυλικό 2-διμεθυλαμινοαιθύλιο
English English 2-dimethylaminoethyl methacrylate
French français méthacrylate de 2-diméthylaminoéthyle
Croatian hrvatski 2-dimetilaminoetil-metakrilat
Italian italiano 2-dimetilaminoetil metacrilato
Latvian latviešu 2-dimetilaminoetilmetakrilāts
Lithuanian lietuvių 2-dimetilaminoetilmetakrilatas
Hungarian magyar 2-dimetilaminoetil-metakrilát
Maltese Malti This edition prints another entry’s name here. The Maltese edition prints the diethylamino name of entry 607-127-00-6. The EC and CAS numbers in the same row, 220-688-8 and 2867-47-2, are the dimethylamino compound and are correct. Regulation (EU) 2018/669, OJ L 115, 4.5.2018, p. 258 metakrilat ta’ 2-dietilamminoetil
Dutch Nederlands 2-dimethylaminoëthylmethacrylaat
Polish polski metakrylan 2-(dimetyloamino)etylu ester 2-(dimetyloamino)etylowy kwasu metakrylowego
Portuguese português metacrilato de 2-dimetilaminoetilo
Romanian română metacrilat de 2-dimetilaminoetil
Slovak slovenčina [2-(dimetylamino)etyl]-metakrylát O -[2-(dimetylamino)etyl]-2-metylpropenoát
Slovenian slovenščina 2-dimetilaminoetil metakrilat
Finnish suomi 2-dimetyyliaminoetyylimetakrylaatti
Swedish svenska 2-dimetylaminoetylmetakrylat

One or more lines above are flagged. In those language editions the Regulation as published in the Official Journal prints something that the rest of the same row contradicts — a name belonging to a different entry, or the qualifier of a paired entry. Each flag cites the amending act and the Official Journal page, so the wording can be checked at source. The lines are reproduced as printed, because Art. 18(2) points at Annex VI and not at our reading of it; the note beside each one says what the row’s own EC and CAS numbers identify.

All 23 language editions of Annex VI carry this entry. Irish is the twenty-fourth official EU language and has no line here for a different reason: no consolidated CLP text has ever been published in Irish, so there is no Irish edition of Annex VI to quote a name from. Source: consolidated CLP, CELEX 02008R1272, language editions. © European Union, https://eur-lex.europa.eu — only the electronic Official Journal of the European Union is authentic.

06 · Label elements

(Dimethylamino)ethyl… GHS label elements

Everything CLP Annex VI fixes for (Dimethylamino)ethyl…, laid out the way it appears on a label. The greyed lines are the parts only the supplier can fill in.

GHS07 Exclamation mark pictogram

Warning

(Dimethylamino)ethyl…

  • Harmful in contact with skin.
  • Harmful if swallowed.
  • Causes skin irritation.
  • Causes serious eye irritation.
  • May cause an allergic skin reaction.
  • Avoid breathing dust/fume/gas/mist/vapours/spray.
  • Wash thoroughly after handling.
  • Do not eat, drink or smoke when using this product.
  • Contaminated work clothing should not be allowed out of the workplace.
  • Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/
  • IF SWALLOWED:
  • IF ON SKIN:
  • IF IN EYES:
  • Call a POISON CENTER/doctor/ if you feel unwell.
  • Get medical advice/attention.
  • Rinse mouth.
  • If skin irritation occurs:
  • If skin irritation or rash occurs:
  • If eye irritation persists:
  • Remove contact lenses, if present and easy to do. Continue rinsing.
  • Wash with plenty of water/

Supplier name, address and telephone number· Product identifier·Nominal quantity

Need this as an actual label? Open (Dimethylamino)ethyl… in the GHS label constructor →

07 · Health hazards

(Dimethylamino)ethyl… health hazards and exposure limits

(Dimethylamino)ethyl… hazard summary

May polymerize on exposure to heat, light, oxidants, reducing agents, or metals causing fire or explosion; A respiratory tract irritant; Corrosive to skin and eyes; [ICSC] A skin, eye, and mucous membrane irritant; In gavage studies of rabbits, electrical brain activity was suppressed followed by clonic-tonic spasms; Highly irritating to skin and eyes, based on animal studies; [HSDB] Heat or contamination can cause exothermic polymerization; Corrosive to eyes and mucous membranes; [CAMEO] Effects in repeated dose feeding studies with rats include late onset chronic convulsions and nerve fiber degeneration in the brain and spinal cord; Corrosive to skin and eyes, based on animal studies; [eChemPortal: SIDSUNEP] Corrosive to skin and eyes; [eChemPortal: ERMA] A skin and eye irritant; May cause skin sensitization; [eChemPortal: ESIS] Danger of skin sensitization; [MAK] A severe irritant that may cause burns; A possible lachrymator and skin sensitizer; [MSDSonline] 2-Dimethylaminoethyl methacrylate (UN2522) has warning of explosive polymerization; [ERG 2016] See ACRYLIC RESINS (MONOMERS).

Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases

08 · Physical and chemical properties

(Dimethylamino)ethyl… properties

Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.

(Dimethylamino)ethyl… boiling point

Property Value Conditions Source
Boiling point 186 °C (366.8 °F) HSDB

(Dimethylamino)ethyl… melting point

Property Value Conditions Source
Melting point -30 °C (-22 °F) freezing point HSDB
-30 °C (-22 °F) ICSC

(Dimethylamino)ethyl… density

Property Value Conditions Source
Density 0.93 g/cm³ ICSC
0.933 g/cm³ at 25 °C HSDB

(Dimethylamino)ethyl… solubility

Property Value Conditions Source
Solubility In water, 1000 g/L at 20 °C (study performed without adjustment of pH value) at 20 °C HSDB
Solubility in water, g/100ml at 25 °C: 10.6 at 25 °C ICSC

(Dimethylamino)ethyl… vapor pressure

Property Value Conditions Source
Vapor pressure 0.8251 mmHg at 25 °C ICSC
0.82 mmHg Haz-Map

(Dimethylamino)ethyl… flash point

Property Value Conditions Source
Flash point 64 °C (147.2 °F) HSDB
73.89 °C (165 °F) HSDB

(Dimethylamino)ethyl… autoignition temperature

Property Value Conditions Source
Autoignition temperature 255 °C (491 °F) ICSC

(Dimethylamino)ethyl… lower explosive limit (LEL)

Property Value Conditions Source
Lower explosive limit (LEL) Explosive limits , vol% in air: 1.2-? ICSC

(Dimethylamino)ethyl… vapor density

Property Value Conditions Source
Vapor density 5.4 (air = 1) HSDB

Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.

09 · Fire and explosion

(Dimethylamino)ethyl… fire and explosion behaviour

These are descriptions rather than measured values, so they are kept out of the table above and quoted here with the source that reported them.

(Dimethylamino)ethyl… fire potential

Combustible

Source: Hazardous Substances Data Bank (HSDB)

10 · Handling and storage

(Dimethylamino)ethyl… storage and handling

(Dimethylamino)ethyl… safe storage

Separated from metals, oxidants, strong reducing agents and food and feedstuffs. Keep in the dark. Store only if stabilized. Store in an area without drain or sewer access.

Source: ILO-WHO International Chemical Safety Cards (ICSCs)

(Dimethylamino)ethyl… storage conditions

Conditions for safe storage, including any incompatibilities: Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Recommended storage temperature 2 - 8 °C Moisture sensitive. Light sensitive. Storage class (TRGS 510): Non-combustible, acute toxic Cat. 1 and 2 / very toxic hazardous materials

Source: Hazardous Substances Data Bank (HSDB)

Planning storage for a mix of chemicals? Check (Dimethylamino)ethyl… in the storage compatibility matrix →

11 · Transport

(Dimethylamino)ethyl… UN number and transport classification

Transport classification is a separate system from the GHS classification above. It decides how a package is marked and how a load may be carried; it does not follow from the workplace label, and the workplace label does not follow from it. The entries below are linked by CAS number, never by name.

(Dimethylamino)ethyl… under UN 2522 — shipping name, class and packing group

Europe · ADR 2025, Table A

Proper shipping name (3.1.2) Class Classification code PG Labels (column 5)
2-DIMETHYLAMINOETHYL METHACRYLATE, STABILIZED 6.1 T1 II
  • ADR label model 6.1 — Toxic substance
6.1

Source: ADR 2025, Table A of Chapter 3.2 · ECE/TRANS/352 Vol. I (UNECE). Class 6.1 is “Toxic substances” (ADR 2.1.1.1).

Proper shipping name (column 2) Class or division PG Labels (column 6)
2-Dimethylaminoethyl methacrylate, stabilized 6.1 II
  • US DOT POISON label (§172.430)
6.1

Source: 49 CFR 172.101 Hazardous Materials Table · eCFR, revision 2026-08-03. Class 6.1 is “Poisonous materials” (49 CFR 173.2).

Full UN 2522 entry — special provisions, packing instructions, quantity limits and the orange plate →

12 · Questions

(Dimethylamino)ethyl… — frequently asked questions

What is the CAS number of (Dimethylamino)ethyl…?

The CAS number of (Dimethylamino)ethyl… is 2867-47-2. Its EC number is 220-688-8.

What is the chemical formula of (Dimethylamino)ethyl…?

The molecular formula of (Dimethylamino)ethyl… is C8H15NO2 and its molecular weight is 157.21 g/mol.

What does a (Dimethylamino)ethyl… label have to show?

Under CLP Annex VI the label for (Dimethylamino)ethyl… carries the pictogram Exclamation mark and the signal word is Warning.

Is (Dimethylamino)ethyl… flammable?

CLP Annex VI assigns (Dimethylamino)ethyl… no flammability hazard class. That is not a statement that it cannot burn: the harmonised list only records the hazards that were assessed for it. The flash point reported for it is 64 °C (147.2 °F) (HSDB).

Is (Dimethylamino)ethyl… a carcinogen?

CLP Annex VI records no harmonised carcinogenicity classification for (Dimethylamino)ethyl…. Annex VI is a list of agreed classifications, not a list of substances found safe, so this is an absence of a classification rather than a clean bill of health.

What is the boiling point of (Dimethylamino)ethyl…?

The boiling point reported for (Dimethylamino)ethyl… is 186 °C (366.8 °F) (HSDB).

What is the melting point of (Dimethylamino)ethyl…?

The melting point reported for (Dimethylamino)ethyl… is -30 °C (-22 °F), freezing point (HSDB).

How should (Dimethylamino)ethyl… be stored?

Conditions for safe storage, including any incompatibilities: Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Recommended storage temperature 2 - 8 °C Moisture sensitive. Light sensitive. Storage class (TRGS 510): Non-combustible, acute toxic Cat. 1 and 2 / very toxic hazardous materials (Hazardous Substances Data Bank (HSDB))

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.