Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Substance profile

Dialifor

Dialifor is a white crystalline solid; also reported as oil.

CAS 10311-84-9 Danger

01 · Identification

What Dialifor is

Dialifor is a white crystalline solid; also reported as oil. It melts at 68 °C.

Under the GHS it carries the signal word Danger.

02 · Identifiers

Dialifor identifiers and molecular data

Dialifor CAS number and EC number

CAS number10311-84-9
EC number233-689-3
Index number (CLP Annex VI)015-088-00-6

Other names for Dialifor

  • dialifos (ISO)
  • 2-chloro-1-phthalimidoethyl O,O-diethyl phosphorodithioate

03 · GHS classification

Dialifor hazard classification

Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.

Dialifor pictograms and signal word

Signal wordDanger

Dialifor hazard class and category

GHS hazard classes Dialifor falls into
Hazard class Category From code Pictogram
Acute toxicity - oral GHS chapter 3.1 Category 1 or 2 H300 GHS06
Acute toxicity - dermal GHS chapter 3.1 Category 3 H311 GHS06
Hazardous to the aquatic environment - acute GHS chapter 4.1 Category 1 H400 GHS09
Hazardous to the aquatic environment - chronic GHS chapter 4.1 Category 1 H410 GHS09

Where two values are shown with “or”, the hazard statement is shared by more than one category or by more than one class, and the code alone does not say which. H272, for example, belongs to oxidising liquids and to oxidising solids — the physical state decides. The binding answer for a specific entry is in the CLP Annex VI table itself.

Dialifor hazard statements (H-codes)

Hazard statements assigned to Dialifor
CodeHazard statement
H300 Fatal if swallowed.
H311 Toxic in contact with skin.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.

This page lists only the codes assigned to Dialifor. The full reference lives on the hazard statements hub, the precautionary statements hub and the GHS pictograms hub.

Safety Data Sheet

Getting an SDS for Dialifor

A Safety Data Sheet is written for a product, not for a substance: the supplier of the grade you actually buy issues it, so two suppliers of Dialifor issue two different sheets. That is why there is no single authoritative SDS for a substance to download — what there is, is the job of collecting the sheets for the products you hold and keeping them current as suppliers revise them.

04 · Precautionary statements

Dialifor precautionary statements

CLP Annex VI assigns 10 precautionary statements to Dialifor. They are grouped the way a label groups them: what to do before handling, what to do when something has already happened, how to store it and how to dispose of it.

Disposal

What has to happen to the contents and the empty container.

Reading the notation. is a blank the supplier fills in — not a truncated sentence.· [square brackets] mark a part printed only when it applies.

05 · Names in the regulation

Dialifor name in 23 EU languages

CLP Annex VI Part 3 is published in every language edition of the regulation, and the identification column is written out in each of them. Nothing below is translated by us: each line is the name as that edition prints it. Under Art. 18(2) the substance name from Annex VI is a lawful product identifier, so this is the wording to put on a label going to that market — and where the cell lists several designations, any one of them qualifies.

Language Name in CLP Annex VI Part 3
Bulgarian български диалифос (ISO) 1-фталимидо-2-хлороетилов O , O -диетилов фосфородитиоат
Spanish español Dialifós (ISO) fosforoditioato de 2-cloro-1-ftalimidoetilo y O , O -dietilo
Czech čeština dialifos (ISO) S -(2-chlor-1-ftalimidoethyl)- O, O -diethyl-fosforodithioát
Danish dansk dialisfos (ISO) 2-chlor-1-phthalimidoethyl- O, O- diethyldithiophosphat
German Deutsch Dialifos (ISO) S -[2-Chlor-1-phthalimidoethyl]- O, O -diethylphosphorodithioat
Estonian eesti dialifoss (ISO) 2-kloro-1-ftaalimidoetüül- O , O -dietüülfosforoditioaat
Greek ελληνικά dialifos (διαλιφός) (ISO) διθειοφωσφορικό 2-χλωρο-1-φθαλιμιδαιθύλιο O , O -διαιθύλιο
English English dialifos (ISO) 2-chloro-1-phthalimidoethyl O , O -diethyl phosphorodithioate
French français dialifos (ISO) phosphorodithioate de 2-chloro-1-phtalimidoéthyle et de O, O -diéthyle
Croatian hrvatski dialifos (ISO) 2-klor-1-ftalimidoetil- O , O -dietil-fosforoditioat
Italian italiano dialifos (ISO) ditiofosfato di 2-cloro-1-ftalimmidoetile e O, O-dietile
Latvian latviešu dialifoss (ISO) 2-hlor-1-ftalimidoetil- O , O -dietilfosforditioāts
Lithuanian lietuvių dialifosas (ISO) 2-chlor-1-ftalimidoetil- O , O -dietilditiofosfatas
Hungarian magyar dialifosz (ISO) 2-klór-1-ftalimidoetil- O , O -dietil-ditiofoszfát
Maltese Malti dialifos (ISO) fosforoditijoat ta’ 2-kloro-1-ftalimidoetil O , O -dietil
Dutch Nederlands dialifos (ISO) 2-chloor-1-ftaalimidoëthyl- O , O -diëthyldithiofosfaat
Polish polski dialifos (ISO) ditiofosforan S -2-chloro-1-ftalimidoetylu- O, O -dietylu
Portuguese português dialifos (ISO) ditiofosfato de 2-cloro-1-ftalimidoetilo e de O , O -dietilo
Romanian română dialifos (ISO) ditiofosfat de 2-cloro-1-ftalimidoetil și de O, O -dietil
Slovak slovenčina dialifos (ISO) S -(2-chlór-1-ftalimidoetyl)- O, O -dietyl-fosforoditioát
Slovenian slovenščina dialifos (ISO) 2-kloro-1-ftalimidoetil O , O -dietil fosforoditioat
Finnish suomi dialifossi (ISO) 2-kloori-1-ftaali-imidoetyyli- O , O -dietyylifosforoditioaatti
Swedish svenska dialifos (ISO) 2-klor-1-ftalimidoetyl- O , O -dietylfosforditioat

All 23 language editions of Annex VI carry this entry. Irish is the twenty-fourth official EU language and has no line here for a different reason: no consolidated CLP text has ever been published in Irish, so there is no Irish edition of Annex VI to quote a name from. Source: consolidated CLP, CELEX 02008R1272, language editions. © European Union, https://eur-lex.europa.eu — only the electronic Official Journal of the European Union is authentic.

06 · Label elements

Dialifor GHS label elements

Everything CLP Annex VI fixes for Dialifor, laid out the way it appears on a label. The greyed lines are the parts only the supplier can fill in.

GHS06 Skull and crossbones pictogramGHS09 Environment pictogram

Danger

Dialifor

  • Fatal if swallowed.
  • Toxic in contact with skin.
  • Very toxic to aquatic life.
  • Very toxic to aquatic life with long lasting effects.
  • Do not eat, drink or smoke when using this product.
  • Avoid release to the environment.
  • Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/
  • IF SWALLOWED:
  • IF ON SKIN:
  • Immediately call a POISON CENTER/doctor/
  • Rinse mouth.
  • Wash with plenty of water/
  • Collect spillage.
  • Dispose of contents/container to

Supplier name, address and telephone number· Product identifier·Nominal quantity

Need this as an actual label? Open Dialifor in the GHS label constructor →

07 · Health hazards

Dialifor health hazards and exposure limits

Dialifor hazard summary

A cholinesterase inhibitor; [Hawley] A mild skin and eye irritant; In an exposure of 120 vineyard workers, symptoms included dizziness, weakness, headache, blurred vision, and tightness in the chest; Most plasma and red cell values were depressed more than 60%. All fully recovered, although 85 received medical attention and three were hospitalized; [HSDB] Some evidence of reproductive effects in feeding study with hamsters; [RTECS] No adverse gross or histopathological observations in three generation oral study with rats; No teratogenic effects observed in two studies with rabbits and one with macaques; No evidence of mutagenicity; No clinical observations of neurotoxicity in study with birds; Mildly irritating to skin and eyes of rabbits; Effects in high-dose feeding studies with rodents include cholinesterase inhibition and some evidence of liver necrosis; No significant effects observed in gross, histopathological, or tumor frequency in long term feeding studies with rats; [INCHEM JMPR] The average of two baseline respective cholinesterase activity determinations three days apart, with no exposures to enzyme inhibiting pesticides for at least 30 days, is recommended for each worker prior to exposure to cholinesterase inhibitors because of large inter-individual differences in published baseline values. To be established at least once a year. Removal from workplace exposures is recommended until the cholinesterase activity returns to within 20% of baseline. [TLVs and BEIs]

Source: Haz-Map, Information on Hazardous Chemicals and Occupational Diseases

08 · Physical and chemical properties

Dialifor properties

Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.

Dialifor melting point

Property Value Conditions Source
Melting point 68 °C (154.4 °F) DOE PAC
68 °C (154.4 °F) range, midpoint shown HSDB
168 °C (334.4 °F) range, midpoint shown HSDB

Dialifor solubility

Property Value Conditions Source
Solubility Sol in aromatic hydrocarbons, ethers, esters, ketones HSDB
Very soluble in cyclohexanone; slightly soluble in aliphatic hydrocarbons, alcohols HSDB
In acetone 760, isophorone 400, chloroform 620, xylene 570, diethyl ether 500, ethanol <10, hexane <10 (all in g/kg at 20 °C) at 20 °C HSDB

Dialifor vapor pressure

Property Value Conditions Source
Vapor pressure 6.2e-8 mmHg at 25 °C HSDB
997600 mmHg at 35 °C HSDB

Dialifor corrosivity

Property Value Conditions Source
Corrosivity NON-CORROSIVE HSDB

Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.

09 · Handling and storage

Dialifor storage and handling

Dialifor storage conditions

Store in tightly closed containers in a cool, well vented area away form strong bases.

Source: Hazardous Substances Data Bank (HSDB)

Dialifor incompatible materials

Strong bases.

Source: Hazardous Substances Data Bank (HSDB)

Dialifor reactivity

Releases nitrogen oxides, sulfur oxides, and phosphorus oxides when heated. Readily hydrolyzed by concentrated alkali. Avoid alkali. [EPA, 1998]. Organophosphates, such as DIALIFOR, are susceptible to formation of highly toxic and flammable phosphine gas in the presence of strong reducing agents such as hydrides. Partial oxidation by oxidizing agents may result in the release of toxic phosphorus oxides.

Source: CAMEO Chemicals

Planning storage for a mix of chemicals? Check Dialifor in the storage compatibility matrix →

10 · Questions

Dialifor — frequently asked questions

What is the CAS number of Dialifor?

The CAS number of Dialifor is 10311-84-9. Its EC number is 233-689-3.

What does a Dialifor label have to show?

Under CLP Annex VI the label for Dialifor carries the pictograms Skull and crossbones and Environment and the signal word is Danger.

Is Dialifor flammable?

CLP Annex VI assigns Dialifor no flammability hazard class. That is not a statement that it cannot burn: the harmonised list only records the hazards that were assessed for it.

Is Dialifor a carcinogen?

CLP Annex VI records no harmonised carcinogenicity classification for Dialifor. Annex VI is a list of agreed classifications, not a list of substances found safe, so this is an absence of a classification rather than a clean bill of health.

What is the melting point of Dialifor?

The melting point reported for Dialifor is 68 °C (154.4 °F) (DOE PAC).

How should Dialifor be stored?

Store in tightly closed containers in a cool, well vented area away form strong bases. (Hazardous Substances Data Bank (HSDB))

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.