Provenance

Reference data from EU CLP Annex VI and published regulations — verify against your supplier's SDS before use.

Build a label

Substance profile

Benomyl

Benomyl is a white crystalline solid with a faint, acrid odor.

CAS 17804-35-2 C14H18N4O3 290.32 g/mol Danger

01 · Identification

What Benomyl is

Benomyl is a white crystalline solid with a faint, acrid odor. Its molecular formula is C14H18N4O3 and its molecular weight is 290.32 g/mol. It melts at 300 °C.

Under the GHS it carries the signal word Danger. It is classed as teratogens.

02 · Identifiers

Benomyl identifiers and molecular data

Benomyl CAS number and EC number

CAS number17804-35-2
EC number241-775-7
Index number (CLP Annex VI)613-049-00-3

Benomyl molecular formula and molecular weight

Molecular formulaC14H18N4O3
Molecular weight290.32 g/mol
Chemical class Teratogens

Other names for Benomyl

  • benomyl (ISO)
  • methyl 1-(butylcarbamoyl)benzimidazol-2-ylcarbamate

03 · GHS classification

Benomyl hazard classification

Harmonised classification under CLP Annex VI. This is the legally binding classification in the EU; other jurisdictions may differ.

Benomyl pictograms and signal word

Signal wordDanger

Benomyl hazard class and category

GHS hazard classes Benomyl falls into
Hazard class Category From code Pictogram
Skin corrosion/irritation GHS chapter 3.2 Category 2 H315 GHS07
Skin sensitisation GHS chapter 3.4 Category 1 or 1A or 1B H317 GHS07
Germ cell mutagenicity GHS chapter 3.5 Category 1A or 1B H340 GHS08
Specific target organ toxicity - single exposure GHS chapter 3.8 Category 3 H335 GHS07
Hazardous to the aquatic environment - acute GHS chapter 4.1 Category 1 H400 GHS09
Hazardous to the aquatic environment - chronic GHS chapter 4.1 Category 1 H410 GHS09

Where two values are shown with “or”, the hazard statement is shared by more than one category or by more than one class, and the code alone does not say which. H272, for example, belongs to oxidising liquids and to oxidising solids — the physical state decides. The binding answer for a specific entry is in the CLP Annex VI table itself.

Benomyl hazard statements (H-codes)

Hazard statements assigned to Benomyl
CodeHazard statement
H340 May cause genetic defects <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
H360FD May damage fertility. May damage the unborn child.
H335 May cause respiratory irritation.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.

This page lists only the codes assigned to Benomyl. The full reference lives on the hazard statements hub, the precautionary statements hub and the GHS pictograms hub.

Safety Data Sheet

Getting an SDS for Benomyl

A Safety Data Sheet is written for a product, not for a substance: the supplier of the grade you actually buy issues it, so two suppliers of Benomyl issue two different sheets. That is why there is no single authoritative SDS for a substance to download — what there is, is the job of collecting the sheets for the products you hold and keeping them current as suppliers revise them.

04 · Precautionary statements

Benomyl precautionary statements

CLP Annex VI assigns 14 precautionary statements to Benomyl. They are grouped the way a label groups them: what to do before handling, what to do when something has already happened, how to store it and how to dispose of it.

Disposal

What has to happen to the contents and the empty container.

Reading the notation. is a blank the supplier fills in — not a truncated sentence.· [square brackets] mark a part printed only when it applies.

05 · Names in the regulation

Benomyl name in 23 EU languages

CLP Annex VI Part 3 is published in every language edition of the regulation, and the identification column is written out in each of them. Nothing below is translated by us: each line is the name as that edition prints it. Under Art. 18(2) the substance name from Annex VI is a lawful product identifier, so this is the wording to put on a label going to that market — and where the cell lists several designations, any one of them qualifies.

Language Name in CLP Annex VI Part 3
Bulgarian български беномил (ISO) метилов 1-(бутилкарбамоил)бензимидазол-2-илкарбамат
Spanish español Benomilo (ISO) 1-(butilcarbamoil)benzimidazol-2-ilcarbamato de metilo
Czech čeština benomyl (ISO) methyl- N -[1-(butylkarbamoyl)benzimidazol-2-yl]karbamát
Danish dansk benomyl (ISO) methyl-1-(butylcarbamoyl)benzimidazol-2-ylcarbamat
German Deutsch Benomyl (ISO) Methyl-1-(butylcarbamoyl)benzimidazol-2-ylcarbamat
Estonian eesti benomüül (ISO) metüül-1-(butüülkarbamoüül)bensimidasool-2-üülkarbamaat
Greek ελληνικά benomyl (μπενομύλη) (ISO) 1-(βουτυλοκαρβαμοϋλο)βενζιμιδαζολ-2-υλοκαρβαμιδικός μεθυλεστέρας
English English benomyl (ISO) methyl 1-(butylcarbamoyl)benzimidazol-2-ylcarbamate
French français bénomyl (ISO) 1-(butylcarbamoyl)benzimidazol-2-ylcarbamate de méthyle
Croatian hrvatski benomil (ISO) metil 1-(butilkarbamoil)benzimidazol-2-ilkarbamat
Italian italiano benomil (ISO) 1-(butilcarbammoil)benzimidazol-2-ilcarbammato di metile
Latvian latviešu benomils (ISO) metil-1-(butilkarbamoil)benzimidazol-2-ilkarbamāts
Lithuanian lietuvių benomilas (ISO) metil-1-(butilkarbamoil)benzimidazol-2-ilkarbamatas
Hungarian magyar benomil (ISO) metil-1-(butilkarbamoil)benzimidazol-2-il-karbamát
Maltese Malti benomil (ISO) 1-(butilkarbamojl)benżimidażol-2-ilkarbamat tal-metil
Dutch Nederlands benomyl (ISO) methyl-1-(butylcarbamoyl)benzimidazool-2-ylcarbamaat
Polish polski benomyl (ISO) 1-(butylokarbamoilo)benzoimidazol-2-ilokarbaminian metylu
Portuguese português benomil (ISO) 1-(butilcarbamoil)benzimidazol-2-ilcarbamato de metilo
Romanian română benomil (ISO) 1-(butilcarbamoil) benzimidazol-2-il carbamat de metil
Slovak slovenčina benomyl (ISO) metyl-[1-(butylkarbamoyl)benzimidazol-2-yl]karbamát
Slovenian slovenščina benomil (ISO) metil 1-(butilkarbamoil)benzimidazol-2-ilkarbamat
Finnish suomi benomyyli (ISO) metyyli-1-(butyylikarbamoyyli)bentsimidatsol-2-yylikarbamaatti
Swedish svenska benomyl (ISO) metyl-1-(butylkarbamoyl)bensimidazol-2-ylkarbamat

All 23 language editions of Annex VI carry this entry. Irish is the twenty-fourth official EU language and has no line here for a different reason: no consolidated CLP text has ever been published in Irish, so there is no Irish edition of Annex VI to quote a name from. Source: consolidated CLP, CELEX 02008R1272, language editions. © European Union, https://eur-lex.europa.eu — only the electronic Official Journal of the European Union is authentic.

06 · Label elements

Benomyl GHS label elements

Everything CLP Annex VI fixes for Benomyl, laid out the way it appears on a label. The greyed lines are the parts only the supplier can fill in.

GHS08 Health hazard pictogramGHS07 Exclamation mark pictogramGHS09 Environment pictogram

Danger

Benomyl

  • May cause genetic defects <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
  • May damage fertility. May damage the unborn child.
  • May cause respiratory irritation.
  • Causes skin irritation.
  • May cause an allergic skin reaction.
  • Very toxic to aquatic life.
  • Very toxic to aquatic life with long lasting effects.
  • Obtain special instructions before use.
  • Avoid breathing dust/fume/gas/mist/vapours/spray.
  • Wash thoroughly after handling.
  • Contaminated work clothing should not be allowed out of the workplace.
  • Avoid release to the environment.
  • Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/
  • IF ON SKIN:
  • IF exposed or concerned:
  • Get medical advice/attention.
  • If skin irritation occurs:
  • If skin irritation or rash occurs:
  • Wash with plenty of water/
  • Collect spillage.
  • Dispose of contents/container to

Supplier name, address and telephone number· Product identifier·Nominal quantity

Need this as an actual label? Open Benomyl in the GHS label constructor →

07 · Health hazards

Benomyl health hazards and exposure limits

Benomyl carcinogenicity classification

Cancer Classification: Group C Possible Human Carcinogen

Source: Hazardous Substances Data Bank (HSDB)

An IARC group and a CLP classification answer different questions. IARC judges whether the evidence for cancer in humans is strong enough; CLP Annex VI is the legally binding EU classification. A substance can carry one and not the other.

Benomyl occupational exposure limits

US occupational exposure limits reported for Benomyl. PEL is enforceable (OSHA), REL is a recommendation (NIOSH), IDLH is the concentration at which escape becomes impossible without injury.
Limit Value Source
PEL 15.0 [mg/m3](total dust), 5 mg/m3(respirable fraction) Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
PEL 15 mg/m³ (total dust), 5 mg/m³ (respirable fraction) Occupational Safety and Health Administration (OSHA)
PEL TWA 15 mg/m3 (total) TWA 5 mg/m3 (resp) See Appendix G The National Institute for Occupational Safety and Health (NIOSH)
IDLH N.D. The National Institute for Occupational Safety and Health (NIOSH)

These are United States values. The European Union sets its own indicative and binding limits, and the figure that applies at a given workplace is the one in the local regulation — not the one shown here.

08 · Physical and chemical properties

Benomyl properties

Every value is shown with the conditions it was measured under and the source it came from. Where sources disagree, all values are listed rather than one being picked — the difference is usually a different form of the substance, not an error.

Benomyl boiling point

Property Value Conditions Source
Boiling point Decomposes decomposes NIOSH
Decomposes (NTP, 1992) decomposes CAMEO
decomposes decomposes OSHA

Benomyl melting point

Property Value Conditions Source
Melting point 300 °C (572 °F) above this value NIOSH
140 °C (284 °F) decomposes, decomposes HSDB

Benomyl density

Property Value Conditions Source
Density 0.38 g/cm³ ICSC

Benomyl solubility

Property Value Conditions Source
Solubility 0.0004% NIOSH
In water 3.8 ppm @ 20 °C. at 20 °C HSDB
Solubility (25 °C): 18 g/kg acetone; 94 g/kg chloroform; 53 g/kg dimethylformamide; 4 g/kg ethanol; 0.4 g/kg heptane; 10 g/kg xylene. at 25 °C HSDB

Benomyl vapor pressure

Property Value Conditions Source
Vapor pressure 3.7e-9 mmHg at 25 °C HSDB
0.00001 mmHg below this value NIOSH

Benomyl autoignition temperature

Property Value Conditions Source
Autoignition temperature 220 °C (428 °F) CAMEO

Benomyl lower explosive limit (LEL)

Property Value Conditions Source
Lower explosive limit (LEL) LEL= 0.05 g/litre in air From table HSDB
Noncombustible Solid NIOSH
0.05 g/L (NTP, 1992) CAMEO

Benomyl corrosivity

Property Value Conditions Source
Corrosivity NON-CORROSIVE TO METALS HSDB

Values compiled from PubChem Laboratory Chemical Safety Summary. Temperatures converted to Fahrenheit for reference.

09 · Handling and storage

Benomyl storage and handling

Benomyl safe storage

Separated from food and feedstuffs. Dry. Well closed. Store in an area without drain or sewer access. Provision to contain effluent from fire extinguishing.

Source: ILO-WHO International Chemical Safety Cards (ICSCs)

Benomyl storage conditions

Decomposed on storage in contact with water... .

Source: Hazardous Substances Data Bank (HSDB)

Benomyl incompatible materials

Incompatible with alkaline materials.

Source: Hazardous Substances Data Bank (HSDB)

Benomyl reactivity

BENOMYL is incompatible with strong acids, peroxides and strong oxidizers. Decomposed by strong alkalis. Also decomposes on storage with water (NTP, 1992).

Source: CAMEO Chemicals

Planning storage for a mix of chemicals? Check Benomyl in the storage compatibility matrix →

10 · Questions

Benomyl — frequently asked questions

What is the CAS number of Benomyl?

The CAS number of Benomyl is 17804-35-2. Its EC number is 241-775-7.

What is the chemical formula of Benomyl?

The molecular formula of Benomyl is C14H18N4O3 and its molecular weight is 290.32 g/mol.

What does a Benomyl label have to show?

Under CLP Annex VI the label for Benomyl carries the pictograms Health hazard, Exclamation mark and Environment and the signal word is Danger.

Is Benomyl flammable?

CLP Annex VI assigns Benomyl no flammability hazard class. That is not a statement that it cannot burn: the harmonised list only records the hazards that were assessed for it.

Is Benomyl a carcinogen?

CLP Annex VI records no harmonised carcinogenicity classification for Benomyl. Annex VI is a list of agreed classifications, not a list of substances found safe, so this is an absence of a classification rather than a clean bill of health.

What is the exposure limit for Benomyl?

The US occupational exposure limit reported for Benomyl is 15.0 [mg/m3](total dust), 5 mg/m3(respirable fraction) (Haz-Map, Information on Hazardous Chemicals and Occupational Diseases). Limits differ by country: the EU sets its own indicative and binding values, and the figure that applies at a given workplace is the one in the local regulation.

What is the boiling point of Benomyl?

The boiling point reported for Benomyl is Decomposes, decomposes (NIOSH).

What is the melting point of Benomyl?

The melting point reported for Benomyl is 300 °C (572 °F), above this value (NIOSH).

How should Benomyl be stored?

Decomposed on storage in contact with water... . (Hazardous Substances Data Bank (HSDB))

Get the free GHS / CLP / OSHA deadline calendar

Verified 2026–2029 compliance dates in one PDF — plus alerts when the rules change.